Description of improvements implemented:
New functions:
This panel will be able to operate with external batteries 🥫 or power sources 🔌 (It has a DC Jack input [15])
It has a MicroUSB port to be able to carry out quick programming with the PC or even carry out updates in less than 2 minutes [16].
Allows external SMA-type antennas (the same as the hybrid ones) [11]:
Panel operation:
Panel operation with the 4 D type batteries 🔋
- The panel enters ECO mode (Removing communication with CLOUD)
- Report everything immediately to both the APP and the ARC
- In the event of an alarm, the panel enables the cloud for X time (configurable time) to allow remote intervention by the user or ARC, after this X time, it enters ECO mode to save batteries.
- The recommended Polling is 6h so that the panel batteries can last 1 year
- Devices such as (door contacts or vibration) can be assigned the WAKE UP attribute which will cause the panel to wake up for (5, 10, 15, 20 or 30 minutes [selectable])
- Arming and disarming automations can be created by schedule and even automatic photo capture.
Panel operation with external battery 🥫 + 4 type D batteries 🔋
- The panel will automatically detect the external battery input and will automatically enable 24h communication with the cloud (No need to configure any parameters, it is fully automatic)
- You can work with lower polling (1h, 30 min or 15 min) and the duration of the external battery will be 1 year with CLOUD at 100%. By having batteries, when the external battery is exhausted, the panel enters ECO mode (Specified in section ↑) and lasts 1 year more on batteries.
Panel operation with 12V power supply 🔌
- Normally this panel is developed for places without power supply, but these places after X time can discharge the power supply, to give the panel more FLEXIBILITY it has been enabled in hardware to allow 12V power supply (The same power input as the external battery) so we have a very wide flexibility at the installation level!
- The panel will automatically detect the power supply input and automatically enable 24h communication with the cloud (No need to configure any parameters, it is fully automatic)
- You can work with lower polling (1h, 30 min or 15 min) and the duration of the external battery will be 1 year with CLOUD at 100%. By having batteries, when the external battery is exhausted, the panel enters ECO mode (Specified in section ↑) and lasts 1 year more on batteries.
For the current panels (VESTA-067 AND VESTA-068) an update has been published in BACKEND (BOGP-3_F 1.0.3.5C)
Panel operation:
Panel operation with the 4 D type batteries 🔋
- The panel will be in ECO mode
- Report everything immediately to both the APP and the ARC
- In the event of an alarm, the panel enables the cloud for X time (configurable time) to allow remote intervention by the user or ARC, after this X time, it enters ECO mode to save batteries.
- The recommended Polling is 6h so that the panel batteries can last 1 year
- Devices such as (door contacts or vibration) can be assigned the WAKE UP attribute which will cause the panel to wake up for (5, 10, 15, 20 or 30 minutes [selectable])
- Arming and disarming automations can be created by schedule and even automatic photo capture.
How to update these panels?
Simply enable the CLOUD and access the automatic updates section, select the latest firmware and that’s it:
